1. 120Ah and 280Ah energy storage cells applicable to various working conditions.
2. Super long cycle life - 8000+.
3. Lower auxiliary power consumption - save 20% auxiliary consumption.
4. BMS active balancing technology - improve the usable capacity by 10%, shorten the commissioning duration by 40%.
5. Remarkable temperature control technology - ≤8 ℃ temperature differences inside a container.
6. High integrated and fully pre-installed - minimized EPC work on site, meet the requirements of rapid deployment and simple installation.
7. Support side by side installation of 2 containers with less installation clearance - save floor area by 20%, energy density is 73 kWh/m2.
SPECIFICATIONS
Item |
Specification |
||
Model | 0.3-0.5 CP | Below 0.3 CP | 1 CP |
Nameplate Energy | 2634.24 kWh | 3010.56 kWh | 1843.2 kWh |
Max. C-rate | 0.5 CP | 0.3 CP | 1 CP |
Cell Capacity | 280 Ah | 280 Ah | 120 Ah |
Voltage Range (V) | 1113-1491 (Full Power) | 1113-1491 (Full Power) | 1120-1420 (Full Power) |
Auxiliary Power Supply | 480 VAC/380 VAC | ||
SOC Calculation Accuracy | ≤3% | ||
SOH (End of Life) | 60% | ||
Environmental Temperature | -30~50 ℃ | ||
Environmental Humidity | 95% RH | ||
Altitude | ≤3000 m |
||
Noise | ≤75dB(A) | ||
Anti - corrosion Level | C4/C5 (optional) | ||
Protection Grade | NEMA Type 3/IP 55 | ||
Dimension (W*D*H) | 6058*2438*2896 mm | ||
Weight | <35000 kg | <35000 kg | <27000 kg |
Fire Suppression System | Aerosol, dry water pipe, gas detection, ventilation system, explosion panel (optional) | ||
Standards or Certificates | NFPA855/68 or 69/70/72 UL1973/UL 9540A/UL9540 IEC62619/CE/UN38.3 |